POLY-CARB

With the acquisition of Dow’s POLY-CARB line of epoxy products, Olin now offers a comprehensive line of solutions for asset preservation. POLY-CARB products have multiple applications, including bridge preservation and performance, road safety, sealers, coatings and adhesives, parking preservation and performance, and adhesives and grouts.

Contact Your Representative

Eastern U.S.

Dan Patacca
216-536-7777
dan@poly-carb.com

Central U.S.

Jason Masters
817-797-1113
wjmasters@olinbc.com

Western U.S.

Bodie Perkins
817-929-9831
bodie@poly-carb.com

Parking, sealers, coatings, and polymer cast inquiries

Brad Ehle
440-715-3065
behle@olinbc.com

 

You can also reach us at 800-225-5649 for more information or to request MSDS or technical data sheets. Orders can be placed via email at orders@poly-carb.com.


POLY-CARB Products

POLY-CARB MARK-10

A solvent-less, low viscosity, high modulus, two-part epoxy adhesive designed for high strength permanent repair of structural cracks in concrete.

POLY-CARB MARK-29

Adhesive for plowable and non-plowable markers. A 100% solids, two-part epoxy system designed to be used as a fast setting, low viscosity (pourable) structural adhesive.

POLY-CARB MARK-29.9

Low-temperature adhesive for plowable and non-plowable markers. A 100% solids, two-part epoxy system designed to be used as a fast setting, low viscosity (pourable) structural adhesive.

POLY-CARB MARK-52.2

Water-based epoxy line marking system. A water-borne premium line marking system with excellent long-term performance. MARK-52.2 is an emulsion and has no toxic or unpleasant fumes at the time of application.

POLY-CARB MARK-55.2

Hybridized polymer pavement marking system (slow set). A two-part 100% solids hybridized polymer system available in traffic safety colors to be used as a long life pavement marking system on both asphalt and concrete surfaces. A highly reflective surface, visible over a long distance can be obtained by broadcasting reflective glass beads immediately after the application of the MARK-55.2 System.

POLY-CARB MARK-55.3

Hybridized polymer pavement marking system. A two-part 100% solids epoxy available in traffic safety colors to be used as a long life pavement marking system on both asphalt and concrete surfaces. A highly reflective surface can be obtained by broadcasting reflective glass beads immediately after the application of the MARK-55.3 System.

POLY-CARB MARK-55.4

Solvent-free hybridized pavement marking system. A two-part solvent free hybridized polymer system available in traffic safety colors to be used as a long life pavement marking system on both asphalt and concrete surfaces. A highly reflective surface, visible over a long distance can be obtained by broadcasting reflective glass beads immediately after the application of the MARK-55.4 System.

POLY-CARB MARK-55.9

Hybridized pavement marking system. A two-part 100% solids hybridized polymer available in traffic safety colors to be used as a long life pavement marking system on both asphalt and concrete surfaces. A highly reflective surface can be obtained by broadcasting reflective glass beads immediately after the application of MARK-55.9 System.

POLY-CARB MARK-127

Gravity-fed crack welding system for concrete structures. A solvent-less, low viscosity and low surface tension polymer system with a built-in affinity for concrete.

POLY-CARB MARK-135 SAFE-T-SEAL

Gravity-fed crack welding system. A solvent-less, low viscosity, polymer gravity fed crack welding system for horizontal concrete decks.

POLY-CARB MARK-151.6

Multi-polymer resurfacing system. A solvent-less, multi-polymer resurfacing system designed to provide a maintenance-free, impact and abrasion resistant surface for new and old concrete surfaces.

POLY-CARB MARK-154 SAFE-T-GRID

Flexible hybridized polymer overlay system. A solvent-less, two-part liquid polymer system designed to provide non-skid and waterproofing qualities for roadways, bridge decks and parking decks.

POLY-CARB MARK-155 UREGRID

Spray applied membrane system. A liquid spray applied waterproofing system that prevents corrosion from soluble salts on concrete and steel surfaces that are to be overlaid with asphalt.

POLY-CARB MARK-163 FLEXOGRID

Hybridized polymer bridge deck overlay system. A thin (1/4″-3/8”) co-polymer overlay system that is twice as strong as concrete and impermeable to water and sodium chloride.

POLY-CARB MARK-163 FLEXOGRID LT

Hybridized polymer bridge deck overlay system for low-temperature applications. A thin (1/4″-3/8”) co-polymer overlay system that is twice as strong as concrete and impermeable to water and sodium chloride.

POLY-CARB MARK-170 SPR, POLYDECK

Polydeck waterproofing system for parking garage decks. MARK-170 POLYDECK is a VOC compliant waterproofing system for multi-level parking garage decks.

POLY-CARB MARK-170.2, FLEXODECK II

Waterproofing system for parking garage decks. A solvent-less traffic bearing waterproofing system for multi-level parking garage decks that is extremely durable and capable of handling heavy vehicular traffic.

POLY-CARB MARK-171

Waterproofing system for parking garage decks. A solvent-less multi-polymer waterproofing system designed to provide a long lasting and reliable maintenance-free, skid, impact and abrasion resistant surface for concrete decks. Upon completion, the final 2-layer system is a uniformly placed 55-500 mils thick surface with exposed aggregates.

POLY-CARB MARK-174

Exterior non-skid polymer overlay system. MARK-174 is a hybridized co-polymer system designed to provide a flexible, yet strong waterproofing and skid resistant system for various traffic surfaces.

POLY-CARB MARK-177.4 SUREGRIP

Skid-proofing system. MARK-177.4 SUREGRIP is a high performance copolymer system formulated specially to provide flexible, yet strong skid-proofing.

POLY-CARB MARK-263 FLEXOTHANE-P

Pourable, self-leveling, two-part urethane sealant. MARK-263 FLEXOTHANE-P is a highly flexible, solvent-less, two-part elastomeric urethane system designed as a pourable material for filling horizontal expansion joints in concrete structures.

POLY-CARB MARK-305 POXYSOLVE

A specially formulated highly potent solvent designed for cleaning static mixing equipment and flushing pavement marking material. MARK-305 is a petroleum based hydrocarbon product that cannot be used for cleaning up aqueous products.


Olin Poly-Carb Administrative Office
8440 Tower Drive
Twinsburg OH 44087
800-225-5649
fax 330-405-3314
orders@poly-carb.com